Sheet metal working

The main structure of the sheet metal cabinet is as follows:

1. The upper and lower boxes of the sheet metal chassis cabinet are made of 1.5mm thick 304# stainless steel raw materials by bending, the lining and baffle are made of 4mm anti-double special plate, and there are some three-stage exhaust planning in the cabinet, which can eliminate the useful emission of exhaust dead angles and gases of different density;

Second, the control panel is located on the side panel of the outer column, which is convenient for investigation and operation and can be disassembled and repaired. Ventilation counter surface selection of 15mm thick epoxy resin board, acid and alkali resistance, corrosion resistance and high temperature;

Power distribution control panel: the power supply and control panel are embedded in the right front side of the upper box, removable and easy to maintain;

Fourth, equipped with secondary circuit electronic control system;

5, the window can choose ≥5mm thick explosion-proof tempered glass and counterweight balancing device, sliding, can stay in any direction of the track; The main window glass can slide freely up and down to facilitate user operation. M12 stainless steel adjustable bolt and mold combination footing, anti-slip and vibration;

Six, the launching system uses imported high-density PP raw materials sinking bend, corrosion resistance, acid and alkali resistance and organic matter, with filtration, odor blocking function.

Seven, the lighting selection of energy-saving lamps, hiding in the top plate, not directly touch the test gas in the fume hood, easy to replace, brightness completely meet the test needs. There are two 10A/220V waterproof universal sockets on the side column;